Cookie Img
Send Inquiry Send SMS    Call Me Free Offline
Home » Products » Master HP UPS Systems » Master HP UPS Systems

Master HP UPS Systems

Master HP UPS Systems
Product Code : HP series
Product Description

Available from 100 to 600kVA the range of MASTER MPS has been improved with the HP series. MASTER HP Series offers maximum power quality and protection for industrial loads and data centers. The UPS has DSP (Digital Signal Processors) technology and an IGBT-based rectifier, which offer true online double conversion power and protection (VFI SS 11 - Voltage and Frequency Independent in compliance with IEC EN 62040-3). This HP series offers unmatched operating efficiency much better than traditional thyristor rectifier-based systems. It also offers convenient maintenance access and a compact footprint which is essential for today's critical functioning environments.

ZERO IMPACT SOURCE:

Provided by an IGBT based rectifier assembly, the HP features are a added advantage with the evolution of with the evolution of the Master series. This on the other hand results in the reduction of impact of UPS on local supply and also simplifies the installation, where limited power is is available in the form of electricity supply generator size or rating.

The MASTER HP is classified as a ‘Zero Impact Source’ and offers:

  • Less than 2.5% input current distortion
  • 0.99 High input power factor
  • To ensure progressive rectifier start up it is installed with power walk-in function
  • When various UPS are connected with the system, delayed start phase is backed with the return of mains power supply

MASTER HP also acts as the high performance filter, preventing its power sources for upstream supply from reactive power and harmonics generated by the powered loads.

BATTERY CARE SYSTEM: MAXIMUM BATTERY CARE

MASTER HP employs the Battery Care System, also can be availed in the MASTER MPS models, to optimize battery performance and to extend the battery life as long as possible.

FLEXIBILITY:

The design with the output transformer is a distinctive attribute of both the conventional series and Master HP which is characterized by the battery and galvanic isolation of load for greater flexibility in the system configurations. As a result it offers feature for the two network inputs (emergency and mains) to separate, and approaching from two different sources of power. This is particularly suitable for parallel systems to maintain the difference between the two sources. Hence, enhancing the reliability of the whole installation.

Main features:

  • Compact size: only 0.85 m2 a for 250kVA UPS
  • High output power
  • Less weight
  • Double load protection, both galvanic and electronic, for the battery.

The MASTER HP range is the best to use in the widest collection of application. Thanks to versatile configurations, available accessories and optional, which is appropriate for powering capacitive loads like blade servers. Availability and authenticity of the power supply for important applications is assured by the centralized or distributed parallel of up to 8 units power parallel or backup, and by all the different available configurations in the MASTER MPS range.

Technical Specification

Models

MHT 100

MHT 120

MHT 160

MHT 200

MHT 250

INPUT

Rated power

100000 VA

120000 VA

160000 VA

200000 VA

250000 VA

Voltage

400 Vac three-phase Vac

400 Vac three-phase Vac

400 Vac three-phase Vac

400 Vac three-phase Vac

400 Vac three-phase Vac

Voltage tolerance

+ 20% - 25%

+ 20% - 25%

+ 20% - 25%

+ 20% - 25%

+ 20% - 25%

Frequency

50/60 Hz with autorange

50/60 Hz with autorange

50/60 Hz with autorange

50/60 Hz with autorange

50/60 Hz with autorange

Frequency tolerance

45/65 Hz

45/65 Hz

45/65 Hz

45/65 Hz

45/65 Hz

Power factor

0,99

0,99

0,99

0,99

0,99

Input current

141 A

169 A

226 A

281 A

352 A

Current distorsion

<3%

<3%

<3%

<3%

<3%

Soft start

0-100% in 10

0-100% in 10

0-100% in 10

0-100% in 10

0-100% in 10

BY PASS

Rated voltage

400 Vac three-phase selectable 380 and 415

400 Vac three-phase selectable 380 and 415

400 Vac three-phase selectable 380 and 415

400 Vac three-phase selectable 380 and 415

400 Vac three-phase selectable 380 and 415

Voltage tolerance

± 15% (selectable from ± 10% to ± 25% from front panel)

± 15% (selectable from ± 10% to ± 25% from front panel)

± 15% (selectable from ± 10% to ± 25% from front panel)

± 15% (selectable from ± 10% to ± 25% from front panel)

± 15% (selectable from ± 10% to ± 25% from front panel)

Rated frequency

50/60 Hz (autorange)

50/60 Hz (autorange)

50/60 Hz (autorange)

50/60 Hz (autorange)

50/60 Hz (autorange)

Frequency tolerance

± 2% (selectable from ± 1% to ± 5% from front panel)

± 2% (selectable from ± 1% to ± 5% from front panel)

± 2% (selectable from ± 1% to ± 5% from front panel)

± 2% (selectable from ± 1% to ± 5% from front panel)

± 2% (selectable from ± 1% to ± 5% from front panel)

Rated current

141 A

169 A

226 A

281 A

352 A

Number phases

3

3

3

3

3

Back-feed protection

yes

yes

yes

yes

yes

Overload capacity Inx10ms

14

14

14

14

14

OUTPUT and INVERTER OUTPUT

Rated power

100000 VA

120000 VA

160000 VA

200000 VA

250000 VA

Active power

80000 W

108000 W

144000 W

180000 W

225000 W

Number phases

3 + N

3 + N

3 + N

3 + N

3 + N

Crest factor (Ipeak/Irms)

3 : 1

3 : 1

3 : 1

3 : 1

3 : 1

Waveform (Battery Mode)

Sinewave

Sinewave

Sinewave

Sinewave

Sinewave

Dynamic stability

± 5% in 5 ms

± 5% in 5 ms

± 5% in 5 ms

± 5% in 5 ms

± 5% in 5 ms

Frequency

same as the input (autorange)

same as the input (autorange)

same as the input (autorange)

same as the input (autorange)

same as the input (autorange)

Voltage distortion with distorcing load

<3%

<3%

<3%

<3%

<3%

Voltage distortion with linear load

<1%

<1%

<1%

<1%

<1%

Frequency stability

± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present

± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present

± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present

± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present

± 0,05% on mains failure ± 2% (selectable from ± 1% to ± 5% from front panel) with mains supply present

Inverter efficiency at rated load

95 %


95 %

95 %

95 %

Overload

110 % 125% 150% 200% of the rated current for 10' / 1' / 7

125% 150% 200% of the rated current for 10' / 1' / 7

125% 150% 200% of the rated current for 10' / 1' / 7

125% 150% 200% of the rated current for 10' / 1' / 7

125% 150% 200% of the rated current for 10' / 1' / 7

RECTIFIER OUTPUT

Ripple

<1%

<1%

<1%

<1%

<1%

BATTERIES

Type

Maintenance-free sealed lead-acid

Maintenance-free sealed lead-acid

Maintenance-free sealed lead-acid

Maintenance-free sealed lead-acid

Maintenance-free sealed lead-acid

Maximum recharge current

0.2xC10

0.2xC10

0.2xC10

0.2xC10

0.2xC10

ENVIRONMENTAL

Altitude max

1000 m

1000 m

1000 m

1000 m

1000 m

Color

Dark grey RAL 7035

Dark grey RAL 7016

Dark grey RAL 7016

Dark grey RAL 7016

Dark grey RAL 7016

Remote controls

EPO and bypass

EPO and bypass

EPO and bypass

EPO and bypass

EPO and bypass

Safety compliance

EN 62040-1:2008; EN 62040-1/EC:2009; EN 62040-1/A1:2013 and Directive 2014/35/EU

EN 62040-1:2008; EN 62040-1/EC:2009; EN 62040-1/A1:2013 and Directive 2014/35/EU

EN 62040-1:2008; EN 62040-1/EC:2009; EN 62040-1/A1:2013 and Directive 2014/35/EU

EN 62040-1:2008; EN 62040-1/EC:2009; EN 62040-1/A1:2013 and Directive 2014/35/EU

EN 62040-1:2008; EN 62040-1/EC:2009; EN 62040-1/A1:2013 and Directive 2014/35/EU

EMC conformance

EN 62040-2 and Directive 2014/30/EU

EN 62040-2 and Directive 2014/30/EU

EN 62040-2 and Directive 2014/30/EU

EN 62040-2 and Directive 2014/30/EU

EN 62040-2 and Directive 2014/30/EU

Protection rating

3

3

3

3

3

Line-Interactive/Smart Active efficiency

up to 98,5%

up to 98,5%

up to 98,5%

up to 98,5%

up to 98,5%

Noise

63 dBA at 1 m

63 dBA at 1 m

63 dBA at 1 m

63 dBA at 1 m

63 dBA at 1 m

Remote signals

voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)

voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)

voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)

voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)

voltage free contacts (mains power failure, UPS on bypass, end of discharge pre-alarm, output 12Vdc 80mA)

Operating temperature

0 ÷ 40 °C

0 ÷ 40 °C

0 ÷ 40 °C

0 ÷ 40 °C

0 ÷ 40 °C

Relative humidity

95% no condensing

95% no condensing

95% no condensing

95% no condensing

95% no condensing

DATA

Weight

656 Kg

700 Kg

800 Kg

910 Kg

1000 Kg

Dimensions (h w d)

1900x800x850 mm

1900x800x850 mm

1900x1000x850 mm

1900x1000x850 mm

1900x1000x850 mm


RIELLO POWER INDIA PVT. LTD.

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



RIELLO POWER INDIA PVT. LTD.
Plot No. 16, Sec--7, Imt Manesar, Gurgaon - 122050, Haryana, India
Phone :+918802219547
Fax :91-124-4871698
Mr. Ashad Mofiz
Mobile :+918802219547

Product Showcase
Send Inquiry Send SMS    Call Me Free